Full Product Line

Click on a product to view its PDF Sheets.
To view them, you will need:



Primers / Sealers

Basic Glaze Tie Coat Clear
Primer over quarry\ceramic tile or existing epoxy\urethane for maximum bond strength.

Basic Poxy High Gloss Clear and Pigmented (Water Based)
Stand alone dustproofer or as a primer under epoxy\urethane systems. See standard color chart for color selection. Minimum 15gal order for resin side only.

Basic Shield #2
Two coat, stand alone dustproofer or as primer under epoxy\urethane systems.


Membrane / Crack Filler


Basic Filler LT
Self Leveling polyurea used to fill holes, cracks, expansion and construction joints on interior horizontal concrete surfaces. One case covers approximately 250 L.F. of joints that are 1/2" by 1/4". Temp limitations, -40 degrees F to 130 degrees F. Allows 10-15% movement. Return to service in 1 hr.

Basic Elast-Coat Clear and Pigmented
Primer over quarry\ceramic tile or existing epoxy\urethane for maximum bond strength.

Basic-Flexible Epoxy
100% Solids, hard rubber like epoxy formulation designed for filling holes, cracks, expansion joints, etc in concrete floors. Easy to pour or inject. Excellent membrane material.


Coatings and Binders



Basic Crete Urethane Slurry Red-Grey-Beige
100% Solids. One step, self leveling, Urethane slurry coating. Withstands aggressive chemical and thermal attack while providing abrasion resistance.

Basic Crete Urethane Slurry Broadcast
100% Solids. One step, self leveling, Urethane slurry coating. Withstands aggressive chemical and thermal attack while providing abrasion resistance with a broadcast of Basic Quartz, aluminum oxide or sand.

Basic Crete Urethane Mortar Red-Grey-Beige
100% Solids. One step, trowel applied Urethane Mortar. Withstands aggressive chemical and thermal attack while providing abrasion resistance.

Basic-Epoxy-P.B.T.
100% Solids, One step, High Build, All purpose Epoxy Coating with excellent chemical resistance and clarity.

Basic Protective Epoxy Coat, Regular, OPF, Fast, No Sag, SH, SL
100% Solids, 2 part, pigmented epoxy. OPF=Orange Peel Finish, Fast= Fast Curing Time, No Sag= Wall, High Gloss Applications, SH=High Shear Loads, SL=Filler Enhanced for Thicker Finishes.

Basic Protective Epoxy Coat SL
BASIC PROTECTIVE EPOXY COAT S/L is a combination of "tinted" BASIC EPOXY PBT 100% solids epoxy, and a special blend of natural quartz aggregates and fillers. The epoxy and aggregates are fused together during application to form an extremely durable, easy to clean, monolithic surface.

Basic Crete Gard
Use only with Basic Gard resin as a Heavy orange peel texture coating.

Basic HC Epoxy TC
Excellent chemical resistance, 100% Solids, Meets USDA, FDA and OSHA Standards, can be used as a Top Coat or Matrix Resin.

Basic Shop Floor
100% Solids Epoxy Slurry application material. Use for basecoats, topcoats and matrix for S/L's, broadcasts and trowel downs.

Basic Glaze Kitchen Formula : Clear\Pigmented
Use only with Basic Glaze Kitchen Formula resin for slurry, base and topcoat in areas exposed to thermal shock and hot oil.

Basic Novolac Epoxy, Clear or Pigmented
Superior Chemical, Solvent, Stain and Heat resistance. Applied by trowel, brush or roller.

Basic Polymer Concrete
Single component latex used with Portland cement, sand, and pea stone to fill, level and pitch concrete from 1/4" to 6" thick.

Basic Crete Urethane TC
100% Solids, aromatic, self leveling urethane system with natural quartz broadcast(s).

Basic Crete Urethane Cove
3 Part Kit, 1Kit covers 35-40 Lin.Ft. Coving Red or Grey Urethane

Basic Crete Urethane Film
Top coat for Basic Crete Urethane Cove

Basic Quartz Floor System
Multi-colored quartz aggregate fused with clear 100% solids epoxy for moderate resistance to solvents, acids and other chemicals. The top choice for decorative flooring applications

Basic Chip
Decorative chips fused with 100% solids epoxy. Provides great looks and easy maintenance.

Basic Crete Epoxy
This heavy duty trowel applied resurfacer, incorporating epoxy resins and specially graded aggregates, is ideal for repair of badly spalled and eroded substrates.

Basic Epoxy PB
This is a general purpose decorative aggregate and heavy duty industrial flooring system. It possesses good chemical resistance, with excellent compressive strength and abrasion resistance.


Aggregates and Fillers


Basic Crete Aggregate Grey, Red, Plain (40 lb. bags)
Special Blend of Coarse, medium and fine aggregates used for heaqvy duty trowel applied toppings. Hand or power trowel. Coverage should be about 2 lbs. per sq. ft. @ 1/4"

Basic Quartz Q-11 or Q-28 Solid Color (50 lb. bags) (Link To Quartz Color Chart)
Solid color quartz used for broadcast floor systems. See color chart.

Basic Quartz Q-11 or Q-28 Premixed (50 lb. bags ) (Link to Quartz Color Chart)
Premixed colored quartz used for broadcast floor systems. See color chart.

Basic Chip Macro Chips- Solid Color (Link to Macro Chip Color Chart)
Primer over quarry\ceramic tile or existing epoxy\urethane for maximum bond strength.

Basic Chip Macro Chips- Premixed Blends (Link to Macro Chip Color Chart)
1 lb covers 9 sq. ft. See color chart. 10 and 55 lb Box

Pre-Mixed Blends: Olive Beige, Oyster shell, Royal Blue, Boulder Grey, Glacier Blue, New England Red, Crushed Granite, Brownstone and Delta Green

Basic Chip Micro Chips - Premixed Blends (Link to Micro Chip Color Chart)
1 lb covers 6.5 sq. ft. See color chart. 10 and 55 lb Box
Pre-Mixed Blends: Desert Tan, Autumn, Forest, Shale, Graphite, Ash, Imperial Blue, Blue Mica and Sky


Performance Topcoats


Basic Aliphatic Shield
Basic Aliphatic Shield is a three component aliphatic urethane protective coating. It is formulated for high traffic areas to protect against chemicals and wear. It is designed as a final topcoat over Basic Protective Epoxy Coat system

Basic Aliphatic Urethane 1 Clear
High performance, two component polyester-urethane top coat. Maximum chemical and stain resistance. Easy maintenance.

Basic Aliphatic Urethane
High Solids, use as a topcoat over Basic Protective Epoxy Coat systems, Basic Chip, Shop Floor, Novolac or Basic Quartz systems. Good chemical and stain resistance. Excellent abrasion and UV resistance .

Basic Glaze Epoxy 5
This is a no odor, fast curing, UV resistance, clear topcoat; recommended as a topcoat for Basic Quartz and Basic Chip decorative floor systems or when an odor free topcoat is required.

Armor Glaze 5000
This is a high solids water based epoxy used as a grout and or topcoat for most of the flooring systems and also serves as a concrete sealer.

Water Base Epoxy 3500
Water Base Epoxy 3500 has excellent hiding properties and provides a quick turnaround, economical two coat system.


Acrylic Primers, Binders, and Topcoats


Basic MMA Base Primer
Low viscosity Methyl Methacrylate primer - 100 sq. ft. per gal.  Use with Basic Cure at various rates.

Basic MMA Resin 1
Medium Viscosity Methyl Methacrylate binder.  Use with Basic Cure various rates.

Basic MMA Resin 2
Medium Viscosity flexible Methyl Methacrylate binder.  Use with Basic Cure various rates.

Basic Top Coat MMA
Medium Viscosity Methyl Methacrylate topcoat.  Use with Basic Cure various rates.

Basic Shield MMA
Thin film system seals and strengthens. It can be pigmented and typically consists of two coats of Basic MMA Base Primer or one coat of Basic MMA Base Primer and one coat of Basic MMA Resin 1.

Basic Bond MMA
Improves bond strength when added to Basic MMA Base Primer for tough to bond surfaces.

Basic Bond MT MMA
Modifier that can be added to Basic MMA Base Primer resins to improve bonding when coating metal or ceramic tile.

Basic Quartz MMA
This is the acrylic counterpart to our Basic Quartz decorative epoxy  resurfacer. Basic Quartz MMA uses the same aggregate broadcast used in the Epoxy Basic Quartz Floor System. This system cures to form a durable non-yellowing, non-chalking surface.

Basic Quartz MMA SL
This system has the same great looks as Basic Quartz MMA but in a thicker self-leveling version. It is perfect for rough, uneven substrates while offering greater impact resistance and high strength for amore abusive environment.

Basic Floor MMA
This industrial strength solid-color flooring system uses Basic MMA Resin 1 resin and natural, graded quartz sand to form an abrasion-resistant monolithic surface.

Basic Floor MMA SL
This self-leveling counter part to our Basic Floor MMA system stands up to most abusive environments. Its self-leveling characteristics make it ideal for rough substrates that require more hiding power.

Basic Chip MMA
This is a decorative yet affordable solution combining Basic MMA Resin 1 resin and multicolored chips.

Basic Chip MMA SL
This is a much thicker version of the Basic Chip MMA system. It is available at twice to four times the thickness of Basic Chip. You can have the hiding power and durability you need without compromising on looks.

Basic Polymer Concrete MMA
This acrylic polymer concrete mix can be used as a mortar or for pothole and spall repair when filled with pea gravel. It consists of a Basic Polymer Concrete resin and select graded aggregates. This system cures to full strength in one hour.

Basic Flexible Top Coat MMA
More flexible than Basic Top Coat MMA and ideal for cold temperature environments.

Basic Top Coat MB MMA
This is a 100% solids, fast curing, high strength, MMA based acrylic reactive resin. It is formulated to form a monolithic bond with other Basic Flex Systems and to be UV resistant.

Basic Shield MMA
This system is formulated clear or pigmented as a thin film coating. Like all of the Basic Polymers MMA  products, it will cure in less than an hour and can be applied at low temperatures. It will strengthen the substrate while improving the looks and functionality of the area. Surface finish can be smoother slip resistant.

Basic Protective Coat MMA SL
BASIC PROTECTIVE COAT MMA SL is a 100% solids, fast curing, high strength; MMA system that cures in 45-60 minutes. At this time, the floor is fully functional. It is a 1/8 - 1/4 inch (3-6 mm) self-leveling overlay system composed of a prime coat, a self-leveling body coat and a topcoat. The finished surface is typically smooth. The system cannot be thinned with solvents.


Wall Coatings


Basic Wall/Basic Wall Fiberglass
Designed to go over concrete, wood, drywall or block, this coating is extremely durable, sanitary and easy to clean.

Basic Wall VC
Also designed to go over concrete, wood, drywall or block, this coating is extremely durable, sanitary and easy to clean. It is a high build, decorative chip epoxy wall system.

Basic Wall VC MMA
This is a 100% solids, fast curing, high strength, MMA based, acrylic wall coating system. It is designed to provide a terrazzo appearance with the benefits of a seamless surface on block or concrete walls.